Home Mopar SRT-4 Electronics / Tuning 03-05 SRT-4 Mopar 3 Bar MAP / TIP Sensor And Adapter Package V2

03-05 SRT-4 Mopar 3 Bar MAP / TIP Sensor And Adapter Package V2

03-05 SRT-4 Mopar 3 Bar MAP / TIP Sensor And Adapter Package V2
Are you running less than 20 psi of boost on the factory turbo of your 03-05 Neon SRT-4? If so, this product is not for you!
 
If you're interested in getting 3 Bar MAP & TIP Sensors for your high boost 03-05 Neon SRT4, or you're using a DSP or SCT to tune your car, this package is for you! It includes two (2) 3 Bar Map Sensors and one (1) aluminum MAP Sensor Adapter. One sensor will replace your factory MAP sensor, and the other will be used as a TIP sensor. As of 10/12/17 we are shipping this kit with a plug and play TIP Sensor that we have modified so that you don't have to find vacuum reducers and hoses for.
 
Note: These sensors are only plug-n-play for Neon SRT-4s equipped with a Mopar Stage 2/3 PCM. For all other Neon SRT-4s, you must have a MAP Sensor rescale done by a custom tuner. This is because the factory PCM expects input from a factory sensor, not a 3 Bar Sensor. If you install a 3 Bar Sensor on your SRT-4 without either a stage 2/3 PCM, or a rescaled PCM, it will not run correctly.
 
As of August 2009, Mopar no longer offers the 3 Bar MAP Sensor used with the Neon SRT-4 Stage 2 & Stage 3 kits. To fill this need, we have identified another Mopar 3 Bar MAP Sensor that can be used in its place. In order to accommodate the angle of this new sensor, an aluminum adapter is used to allow the sensor to be mounted to the 03-05 Neon SRT-4 intake manifold. The adapter has a threaded male port with rubber o-ring to seal tightly to the intake manifold, and it's held securely in place with allen head screws.
 
The primary reason this adapter was designed was not only to make it easier to install, but to keep the wiring from having to be cut and extended. If the factory wiring is cut, the voltage output from the sensor will be modified, and could create incorrect readings from the MAP sensor to the PCM.
SKU 3BAR-KIT-V2  
 
Our price: $109.99
Quantity   

Customers also bought

2.5" T-BOLT CLAMP
2.5" T-BOLT CLAMP
$4.50
 
COBB Anti-Swaybar, Front 32mm (08-12 Evo X)2-Position
COBB Anti-Swaybar, Front 32mm (08-12 Evo X)2-Position
$299.00
 
Cold Air Intake
Cold Air Intake
$286.99
 
Cold Air Intake
Cold Air Intake
$303.99
 
Cold Air Intake Use w/ 22-425
Cold Air Intake Use w/ 22-425
$156.99
 
Short Ram Intake
Short Ram Intake
$172.99
 
Comp Cam ZEX Dodge Neon 2.0L SOHC
Comp Cam ZEX Dodge Neon 2.0L SOHC
$285.00
 
SDK Solid K-Frame Mount
SDK Solid K-Frame Mount
$220.00
 
HD/Race Sprung 6 Pad
HD/Race Sprung 6 Pad
$395.00