MPx Check Valve 8mm size

MPx Check Valve 8mm size
MPx Check Valve 8mm size (Prevent PCV Damage)


When running higher boost levels, we have seen many cases of PCV valve failures (blowing out its internals into the valve cover), causing a massive pressurization/ Vacuum leak in the crank case. When you pressurize the crank case, it can blow seals out, have many gaskets leak oil, and cause oil to push through the turbo seals making your car smoke out of the exhaust or contaminate the charge piping.

To help assist the PCV from coming apart from higher boost levels than it was designed for, we have designed an inexpensive billet 8mm check valve to be put between the PCV valve and intake manifold. If you are running a catch can, this valve is to be installed between the catch can and intake manifold. The MPx check valve has been pressure tested up to 125psi and opens at a mere 1inHg of vacuum. This valve comes in an anodized black and has a directional arrow to ensure proper direction of installation (arrow points towards intake manifold source, points away from PCV valve).
SKU MPX-CHECK8MM  
Weight 1.00 lbs
 
Our price: $28.99
Quantity   

Customers also bought

Eyelids Paint Service
Eyelids Paint Service
$25.00
 
V2 Intake
V2 Intake
$359.99
 
Brute Force Intake
Brute Force Intake
$162.99
 
HKS Blow Off Valve SSQV4
HKS Blow Off Valve SSQV4
$259.99
 
03-05 SRT-4 Mopar Cam Position Sensor
03-05 SRT-4 Mopar Cam Position Sensor
$57.99
 
SDK Threaded Sensor & Weld Bung
SDK Threaded Sensor & Weld Bung
$65.00
 
XT/Race Rigid 6 Pad
XT/Race Rigid 6 Pad
$438.00
 
HD/Race Sprung 6 Pad
HD/Race Sprung 6 Pad
$395.00
 
Sport/Race Rigid 6 Pad
Sport/Race Rigid 6 Pad
$332.00