Home Mopar SRT-4 Electronics / Tuning 03-05 SRT-4 Mopar 3 Bar MAP / TIP Sensor And Adapter Package

03-05 SRT-4 Mopar 3 Bar MAP / TIP Sensor And Adapter Package

03-05 SRT-4 Mopar 3 Bar MAP / TIP Sensor And Adapter Package

Have below 20 psi, and have a stock factory turbo on your 03-05 SRT4? DO NOT READ FURTHER AS THIS PRODUCT WILL NOT BE BENEFICIAL TO YOU.

Interested in getting a 3 bar map sensor for your high boost 03-05 Dodge SRT4? Using a DSP or SCT to tune your car? This package is for you! This will include 2 3 bar map sensors, and a map adaptor.

One 3 bar map sensor will replace your original map and the other map will be used as a tip sensor. The sensor used for the tip line needs a vacuum reducer that we do not provide. Please source one at your local auto parts store. Please also note - for Mopar stage 2/3 turbo kit pcm equipped SRT-4's, these are direct plug and play. For all other 03-05 Neon SRT-4's, you will need to have a map sensor rescale done by a custom tuner. This is because the factory pcm expects input from a factory sensor not a 3 bar sensor. If you install a 3 bar sensor into your SRT4 without either a stage 2/3 pcm, or a rescaled pcm, it will not run correctly.

Well, up until August 2009, we could get the 3 bar map sensors from Mopar that were used in the stage 2 and stage 3 kits. But, now that the stage 2 and stage 3 kits are discontinued, Mopar no longer offers the stage 2/3 map sensors. So, to fill the need, we found another Mopar 3 bar map sensor that could be used, but the angle for the sensor was incorrect. So, a adaptor was made out of aluminum that would allow the new Mopar 3 bar map sensor to be mounted onto the 03-05 Dodge SRT4 intake manifold.

The adaptor has a male threaded port with a rubber o ring to seal itself tightly to the intake manifold, and its held securely onto the intake manifold with allen head screws. The primary reason this adaptor was designed was not only to make it easier to install, but to keep the wiring from having to be cut and extended. If the factory wiring is cut, the voltage output from the sensor will be modified, and could create incorrect readings from the map sensor to the PCM.

SKU 3BAR-KIT  
 
Our price: $107.98
Quantity   

Customers also bought

SRT-4 ARP PRO SERIES FLEXPLATE BOLT KIT
SRT-4 ARP PRO SERIES FLEXPLATE BOLT KIT
$41.99
 
Master Cylinder Brace FR-S / BRZ
Master Cylinder Brace FR-S / BRZ
$115.00
 
Subaru 5-Speed Double Adjustable Short Throw Shifter - Wide Barrel
Subaru 5-Speed Double Adjustable Short Throw Shifter - Wide Barrel
$135.00
 
SDK SRT-4 Racing Head - Stage 4
SDK SRT-4 Racing Head - Stage 4
$1745.00
 
Ford Fiesta ST Cat-Back Exhaust System
Ford Fiesta ST Cat-Back Exhaust System
$745.00
 
MAZDASPEED6 SF Intake System - COBB Blue
MAZDASPEED6 SF Intake System - COBB Blue
$195.00
 
Infinity-6/8h(PN: 30-7106 & 30-7108) Plug & Play Jumper Harness: Mitsubishi 2003-2005 Lancer Evo
Infinity-6/8h(PN: 30-7106 & 30-7108) Plug & Play Jumper Harness: Mitsubishi 2003-2005 Lancer Evo
$224.87
 
Ported Exhaust Manifold
Ported Exhaust Manifold
$180.00
 
-16AN Black Nylon Braided Hose, E85 Safe
-16AN Black Nylon Braided Hose, E85 Safe
$22.95